User’s Guide for the WG602 v3 54 Mbps Wireless Access Point
5-2 Advanced Configuration
202-10060-01, September 2004
Configuring Wireless Distribution System Links
The 54 Mbps Wireless Access Point WG602 v3 lets you build large wireless networks. Examples
of wireless bridging configurations are:
• Point-to-point.
• Multi-point.
These features are discussed below.
How to Configure Wireless Bridge Links
To configure wireless bridge links, follow these steps:
1. Click the Wireless Bridging link in the Advanced section of the main menu.
Figure 5-1: Wireless Bridging page
2.
Select the radio button for the wireless access point mode you want to configure.
3. Click Apply to save your settings.
To Next Page
Loading...
