User’s Guide for the WG602 v3 54 Mbps Wireless Access Point
Network, Routing, Firewall, and Cabling Basics C-15
202-10060-01, September 2004
The WG602 v3 Access Point incorporates Auto Uplink
TM
technology (also called MDI/MDIX).
Each LOCAL Ethernet port will automatically sense whether the Ethernet cable plugged into the
port should have a normal connection (e.g. connecting to a PC) or an uplink connection (e.g.
connecting to a router, switch, or hub). That port will then configure itself to the correct
configuration. This feature also eliminates the need to worry about crossover cables, as Auto
Uplink
TM
will accommodate either type of cable to make the right connection.
To Next Page
Loading...
