EasyManuals Logo

NETGEAR WN2000RPT - Universal WiFi Range Extender User Manual

NETGEAR WN2000RPT - Universal WiFi Range Extender
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14 | Chapter 2. Range Extender Network Settings
Universal WiFi Range Extender WN2000RPT
WPA-PSK [TKIP]. WPA is more secure than WEP. When using wireless computers or
devices that support WPA, you can enter a passphrase to join the extender’s wireless
network.
WPA2-PSK [AES]. WPA2 is even more secure, but some older computers do not
support this standard. When using wireless computers or devices that support WPA2,
you can enter the passphrase to join the extender’s wireless network.
WPA-PSK [TKIP] + WPA2-PASK [AES]. When using wireless computers or devices
that support either WPA or WPA2, you can enter the passphrase to join the extender’s
wireless network.
4. Click Apply to save your settings.
5. Use your wireless computer to connect to the extender’s network with its new settings. The
Smart Wizard can guide you through this process.
Setting Up WEP
1. In the Wireless Settings screen, in the Security Options section, select the WEP radio
button.
2. Select the authentication type: Automatic, Open System, or Shared Key. The default is
Open System.
Note: The authentication is separate from the data encryption. You can
select authentication that requires a shared key, but still leaves data
transmissions unencrypted. Security is stronger if you use both the
Shared Key and WEP encryption settings.
3. Select the encryption strength setting:
WEP 64-bit encryption. Enter 10 hexadecimal digits (any combination of 0–9, a–f,
or A–F).
WEP 128-bit encryption. Enter 26 hexadecimal digits (any combination of 0–9, a–f,
or A–F).
4. Enter the encryption keys. You can manually or automatically program the four data
encryption keys. These values must be identical on all computers and access points in your
network:
Passphrase. To use a passphrase to generate the keys, enter a passphrase, and
click Generate. This automatically creates the keys. Wireless computers must use
the passphrase or keys to access the range extender.
Note: Not all wireless computers support passphrase key generation. If
your computer does not support the passphrase, then you will need
to type the encryption key in order to join the wireless network.

Other manuals for NETGEAR WN2000RPT - Universal WiFi Range Extender

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR WN2000RPT - Universal WiFi Range Extender and is the answer not in the manual?

NETGEAR WN2000RPT - Universal WiFi Range Extender Specifications

General IconGeneral
Frequency Band2.4 GHz
Ethernet Ports1 x 10/100 Mbps
SecurityWEP, WPA, WPA2
Wireless SpeedUp to 300 Mbps
Wireless Standard802.11n
AntennaInternal

Related product manuals