EasyManuals Logo
Home>NETGEAR>Extender>WN2000RPT - Universal WiFi Range Extender

NETGEAR WN2000RPT - Universal WiFi Range Extender User Manual

NETGEAR WN2000RPT - Universal WiFi Range Extender
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Chapter 2. Range Extender Network Settings | 15
Universal WiFi Range Extender WN2000RPT
Key 1Key 4. These values are not case-sensitive. You can manually enter the four
data encryption keys. These values must be identical on all computers and access
points in your network. Enter 10 hexadecimal digits (any combination of 0
9, af, or
A
F).
5. Select which of the four keys will be the default.
Data transmissions are always encrypted using the default key. The other keys can be
used only to decrypt received data. The four entries are disabled if WPA-PSK or WPA
authentication is selected.
6. Click Apply to save your settings.
Setting Up WPA, WPA2, or WPA + WPA2
Both WPA and WPA2 provide strong data security. WPA with TKIP can be used on Windows
systems with Service Pack 2 or later. WPA2 with AES is a hardware implementation; see
your device documentation before implementing it.
To configure WPA or WPA2 in the range extender:
1. On the Wireless Setting screen, select the radio button for the WPA or WPA2 option of
your choice.
2. The settings displayed on the screen depend on which security option you select.
3. For WPA-PSK or WPA2-PSK, enter the passphrase.
4. Click Apply to save your settings.
Range Extender IP Address Setup
From the range extender menu at http://www.mywifiext.net, under the Maintenance heading,
select IP Address.
The IP Address screen shows whether the range extender is set to get its IP address
dynamically from the router (this is the most common setting), or is set as a static IP address.
Get Dynamically From Router. The wireless network router assigns an IP address when
the range extender connects to its wireless network. Most networks are set up so that the
router automatically does this.
Use Static IP Address. Specify a static IP address. This is not usually necessary. If you
set this up, you should be technically experienced or have a technically experienced
person help you.
- IP Address. The static IP address.
- IP Subnet Mask. The subnet mask associated with the IP address.
- Gateway IP Address. The IP address for the gateway.
- Primary DNS. The primary domain name server (DNS).
- Secondary DNS. The secondary domain name server (DNS).

Other manuals for NETGEAR WN2000RPT - Universal WiFi Range Extender

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR WN2000RPT - Universal WiFi Range Extender and is the answer not in the manual?

NETGEAR WN2000RPT - Universal WiFi Range Extender Specifications

General IconGeneral
BrandNETGEAR
ModelWN2000RPT - Universal WiFi Range Extender
CategoryExtender
LanguageEnglish

Related product manuals