NETGEAR WN2000RPTv2 Installation Guide

8
Option 2: Connecting with web browser setup guide
1. Once the Extender is powered on and the Status LED is
green, use a wireless network manager on a PC to find and
connect to NETGEAR_EXT (SSID) wireless network.
Tip: You can use any wireless network manager utility
on a PC or tablet to find and connect to the
Extender wireless network.
After the connection with the PC is established, the PC to
Extender LED turns green. Next, you need to connect the
Extender to your existing Wi-Fi network.

NETGEAR WN2000RPTv2 Specifications

General

WiFi Technology	802.11n
Frequency Band	2.4GHz
Ethernet Ports	1 x 10/100 Mbps
Antenna	Internal
Wireless Speed	300 Mbps
Security	WEP, WPA, WPA2
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
LED Indicators	Ethernet
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)