NETGEAR WN3000RP Installation Guide

14
1. Set up the extender.
For more information, see Place the Extender and Apply Power
on page 6.
2. Connect the extender to an existing WiFi network.
For more information, see Connect to an Existing WiFi Network
on page 6.
3. Plug the Ethernet cable from an Ethernet-enabled device in to the
port on the extender.
Log In to Access Extender Settings
After installation, you can log in to the extender to view or change the
extender’s settings.
1. Connect a computer or mobile device to the extender’s network.
2. Launch a web browser and enter www.mywifiext.net or
www.mywifiext.com in the address field.
A login screen displays.
3. Enter admin for the user name and password for the password.

NETGEAR WN3000RP Specifications

General

Interface	Ethernet
Connectivity technology	Wireless
Wi-Fi band	Single-band (2.4 GHz)
Ethernet LAN	Yes
Security algorithms	WEP, WPA, WPA2-PSK
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Chipset	-
Internal	No
Certification	RoHS, WEEE, CEC
Component for	PC/Laptop
Product color	White
Dimensions (WxDxH)	112 x 74 x 45 mm
Minimum system requirements	802.11 b/g/n 2.4 GHz wireless router or gateway 802.11 b/g/n 2.4 GHz wireless adapter or Ethernet adapter and cable for each computer
Compliance industry standards	IEEE 802.11 b/g/n
Compatible operating systems	Windows 7, Vista, XP, 2000 Mac OS UNIX Linux

Weight and Dimensions

Weight	245 g