NETGEAR WN3000RP - LED Descriptions

5
LED Descriptions
• Solid green. Best connection.
• Solid amber. Good connection.
• Solid red. Poor connection.
• Off. No connection.
• Solid green. Best connection.
• Solid amber. Good connection.
• Solid red. Poor connection.
• Off. No connection.
• Solid amber. The
extender is booting.
• Solid green. The
extender is powered on.
• Off. The
extender is powered off.
• Solid green. WiFi security is enabled (WPA or WPA2).
• Blinking green. A
WPS connection is in progress.
• Off. WiFi security is not enabled.
Note: If the Router Arrow LED or Client Arrow LED
blinks, see Find the Best Location on page 12. If no arrow LEDs are
lit, the extender is in a good location.
Router Link LED This LED indicates the connection between the extender
and the router or access point.
Client Link LED This LED indicates the connection between the extender
and a computer or mobile device.
Power LED
WPS LED