NETGEAR WN3000RP Installation Guide

8
• New extended network name. MyNetworkName_EXT
4. Connect your WiFi devices to the new extender network.
Use the same WiFi password that you use for your WiFi router.
5. Unplug the extender and move it to a new location closer to the
area with a poor WiFi signal.
The location that you choose must be within the range of your
existing WiFi router network.
6. Plug the extender into an electrical outlet.
The Power LED lights green. If the Power LED does not
light, press the Power button.
Use the Router Link LED on the front panel to help you choose a
spot where the extender-to-router connection is optimal.
Connect with NETGEAR genie Smart Setup
1. Use a WiFi network manager on a computer or mobile device to
find and connect to the NETGEAR_EXT (SSID) WiFi network.
After the connection with the computer or mobile device is
established, the Client Link LED lights.
2. Open a web browser window from the same computer or mobile
device.
The browser takes you directly to the NETGEAR genie smart
setup.

NETGEAR WN3000RP Specifications

General

Interface	Ethernet
Connectivity technology	Wireless
Wi-Fi band	Single-band (2.4 GHz)
Ethernet LAN	Yes
Security algorithms	WEP, WPA, WPA2-PSK
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Chipset	-
Internal	No
Certification	RoHS, WEEE, CEC
Component for	PC/Laptop
Product color	White
Dimensions (WxDxH)	112 x 74 x 45 mm
Minimum system requirements	802.11 b/g/n 2.4 GHz wireless router or gateway 802.11 b/g/n 2.4 GHz wireless adapter or Ethernet adapter and cable for each computer
Compliance industry standards	IEEE 802.11 b/g/n
Compatible operating systems	Windows 7, Vista, XP, 2000 Mac OS UNIX Linux

Weight and Dimensions

Weight	245 g