NETGEAR WN3000RPv3 User Manual

Extender Network Settings
31
N300 WiF Range Extender
6. Select Settings > Connected Devices.
The Connected Devices section displays the MAC addresses and virtual MAC addresses
for computer and WiFi devices that are connected to the extender network.
7. On the router, add the extender’s virtual MAC address and all the virtual MAC addresses
connected to the extender network to your router’s MAC filter table.
8. Enable the router’s MAC filter, WiFi access control, or ACL.

NETGEAR WN3000RPv3 Specifications

General

WiFi Technology	802.11n
WiFi Performance	N300 (300 Mbps)
WiFi Band	2.4GHz
Number of Ethernet Ports	1
Ethernet Port Type	10/100 Mbps
Security	WEP, WPA/WPA2-PSK (Wi-Fi Protected Access)
LED Indicators	Power
Button Controls	WPS