NETGEAR WN3000RPv3

Maintain and Monitor the Extender
37
N300 WiF Range Extender
7. If your browser is not set up to save downloaded files automatically, locate where you want
to save the file.
Restore the Configuration Settings
You can restore the configuration file of the extender to a previously saved configuration file.
 To restore the extender configuration settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser
.
2. In the address field of your browser
, enter www.mywifiext.net.
3. When prompted, enter your email address and password.
The Status page displays.
4. Click the Menu icon
.
The extender menu displays.
5. Select Settings > Other.
6. Click the BROWSE button.
7. Locate and select the previously saved backup file.
By default, the name of the backup file is NETGEAR_WN3000RPv3.cfg.
CAUTION:
After you click the RESTORE button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting.
8. Click the REST
ORE button.