Supplemental Information
46
N300 WiF Range Extender
Factory Default Settings
The following table lists the factory settings for the extender. You can use the Factory Reset
button or the Erase feature to return the extender to these settings. (See Return the Extender
to Its Factory Settings on page 24.)
Table 2. Factory settings
Feature Setting
Setup Wizard Enabled
WiFi communication Enabled
WiFi network name (SSID) NETGEAR_EXT
Security Disabled
Transmission speed Auto
1
1. Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Country/region Varies by region
Operating mode 802.11n, 802.11g, 802.11b
Data rate Up to 300 Mbps
DHCP Client enabled
Technical Specifications
The following table includes the product specifications.
Table 3. Technical specifications
Extender Specifications
Network protocol and
standards compatibility
Data and routing protocols: TCP/IP, DHCP server and client, DNS relay
Power consumption 100–240V 0.1 A, 50–60 Hz
Physical specifications • Dimensions: 67 x 55 x 34 mm (2.64 x 2.17 x 1.34 in.)
• W
eight: 102–10 g (3.60–3.88 oz) varied by power plug type
Environmental • Operating temperature: 32° to 140°F (0° to 40°C)
• Operating humidity: 90% maximum relative humidity
, noncondensing
• Electromagnetic emissions: Meets requirements of FCC Part 15
Class B.
Interface • Local: 10BASE-T
, 100BASE-Tx, RJ-45
• 802.1
1n, 802.11g, 802.11b
To Previous Page
Loading...
