13
Troubleshooting
If the browser does not display the web page:
• Restore the router to factory default settings. Use a paper clip to
press the Reset button for 5 seconds. Release the button when
you see that the Power LED is blinking amber. The router reboots
immediately.
• Make sure that the computer is connected to one of the four LAN
Ethernet ports or wirelessly connected to the router.
• Make sure that the router has full power, the Power LED is solid
green, and the Ethernet LED is either solid amber or solid green.
• Close and reopen the browser to make sure that the browser
does not cache the previous page.
• Type http://www.routerlogin.net.
• If the computer is set to a static or fixed IP address (this setting is
uncommon), change it to obtain an IP address automatically from
the router.
To Next Page
Loading...
Need help?
General
