3DHD Home Theater Adapter WNHD3004 User Manual
Wireless Security 4-5
v1.0, November 2010
Viewing Network Settings
This section describes the network settings that you can view in the Network Settings screen,
which you access under Basic in the main menu.
1. Log in to the unit.
2. Select Network Settings under Basic in the main menu.
On this screen, you can:
• Change the default IP addresses of the AP and Bridge/Station through this screen.
For example, if you want to enable a DHCP server, change the LAN Connection Type from
Dynamic IP to Static IP.
The AP has a default IP of 192.168.1.240, and the Bridge/Station has a default IP address of
192.168.1.241. Resetting your device to factory defaults resets these IP addresses as well. This
screen allows you to change the IP addresses.
To Next Page
Loading...
Need help?
General
