3DHD Home Theater Adapter WNHD3004 User Manual
Using Network Management Tools 6-9
v1.0, November 2010
A screen is provided for upgrading the router. From the main menu of the browser interface, under
Tools, select Firmware to display the Firmware Upgrade screen.
From this screen, you can check for new software versions by clicking the Check button. If a new
version is found, you can download and install it in one step.
Alternatively, you can manually install an upgrade file stored on your computer.
Upgrading Automatically to New Software
You can click the Check button in the Firmware screen to search for new software.
If the unit discovers a newer version of software, you can download and install it.
Figure 6-5
Tip: Before upgrading the router software, use the router Settings Backup screen to save
your configuration settings. A router upgrade might cause the router settings to
revert to the factory defaults. If this happens, after completing the upgrade, you can
restore your settings from the backup.
To Next Page
Loading...
Need help?
General
