N300 Wireless Router with USB WNR2200 User Manual
Troubleshooting 8-12
v1.0, September 2010
This field determines which operating frequency is used. It should not be necessary to change
the wireless channel unless you notice interference problems with another nearby wireless
router or access point. Select a channel that is not being used by any other wireless networks
within several hundred feet of your router. For more information about the wireless channel
frequencies, click the link to the online document “Wireless Networking Basics” in
Appendix B.
6. Set the mode to Up to 150 Mbps.
7. For Security Options, select None.
8. Click Apply to save your changes.
9. Select Advanced Wireless Settings under Advanced in the main menu of the WNR2200
router.
Note: If you are configuring the router from a wireless computer and you change the
router’s SSID, channel, or security settings, you will lose your wireless
connection when you click Apply. You must then change the wireless settings
of your computer to match the router’s new settings.
Figure 8-2
To Next Page
Loading...
