N300 Wireless Router with USB WNR2200 User Manual
Safeguarding Your Network 2-21
v1.0, September 2010
– Enable SSID Broadcast – If selected, the Wireless Access Point broadcasts its name
(SSID) to all Wireless Stations. Stations with no SSID can adopt the correct SSID for
connections to this Access Point.
– Enable Wireless Isolation – If selected, the wireless client under this SSID can only
access the Internet, and cannot access other wireless clients, even clients under the same
SSID, Ethernet clients, or this device.
– Allow Guest to access MY Local Network – If selected, any user who connects to this
SSID can access local networks associated with the router like users in the primary SSID.
3. Give the wireless network a name.
The name is case-sensitive and can be up to 32 characters. The same name must be assigned to
all wireless devices in your network. NETGEAR recommends that you change the name to a
different value.
4. Select a Security option from the list.
5. Click Apply to save your selections.
To Next Page
Loading...
