NETGEAR WNR2200 - Page 153

N300 Wireless Router with USB WNR2200 User Manual
Index-4
v1.0, May 2011
R
radio, wireless 3-19
range, router 7-5
ReadyShare Access 8-6, 8-10
reducing interference 7-5
reference documents B-1
releasing connection status 5-8
remote devices, testing path 9-8
remote management 5-12
renewing connection status 5-8
repeater units 6-25
requirements, speed 7-2
reserved IP adresses 6-4
restarting network 9-2
restoring
configuration 5-10
default factory settings 5-11, 9-13, A-1
Restrict Wireless Access by MAC Address 3-10
RIP (Router Information Protocol) 6-3
router status, viewing 5-5
S
sample network, figure 7-4
screen display language 2-4
selecting 2-4
service numbers 4-7
services, blocking 4-6
setting time 4-12
settings, default. See default factory settings
SMTP server 4-10
software, upgrading 5-1
specifications
general A-3
technical A-1
speed requirements 7-2
SPI (Stateful Packet Inspection) firewall 6-7
SSID 9-11
SSID broadcast 9-13
standards, compatibility A-3
static routes 6-9
Status Light 1-3, 1-4
status, router, viewing 5-5
streaming video and audio 7-2
subnet mask 5-6
system up time 5-9
T
TCP/IP network, troubleshooting 9-6
technical specifications A-1
testing wireless connections 9-10
time of day, troubleshooting 9-8
time to live, advertisement 7-14
time, setting 4-12
time-out
port triggering 6-20
trademarks ii
traffic metering 5-14
troubleshooting 9-1
trusted user 4-6
U
Universal Plug and Play (UPnP) 7-13
up time, system 5-9
updating firmware 2-2
upgrading router software 5-1
USB
advanced configuration 8-7
basic storage settings 8-4
drive requirements 8-1
file sharing 8-2
network folder, creating 8-9
ReadyShare Access 8-6, 8-10
specifying approved devices 8-11
unmounting a USB drive 8-10