N300 Wireless Router with USB WNR2200 User Manual
Protecting Your Network 4-12
v1.0, May 2011
Setting the Time
The WNR2200 router uses the Network Time Protocol (NTP) to obtain the current time and date
from one of several network time servers on the Internet. To localize the time for your log entries,
you must specify your time zone:
• Time Zone. Select your local time zone. This setting is used for the blocking schedule and for
time-stamping log entries.
• Automatically Adjust for Daylight Savings Time. Select this check box if your region
supports daylight savings time. When this check box is set, the router will adjust the time by
adding one hour during the daylight savings time period. When daylight savings time ends, be
sure to un-check this check box.
To Next Page
Loading...
