Getting Started
14
Universal WiFi Extender - Powerline Edition (XAVN2001)
The following screen displays:
8. Enter the following wireless settings:
• Wireless Netw
ork Name (SSID)
• Wireless
Security Type
• Passphrase
If you want to clone your existing
wireless network, enter the same wireless settings that
your router or gateway uses.
If you want to create a new wireless n
etwork, enter new wireless settings.
9. Click Apply
to save your changes.
10. Wh
en you are finished with the wireless settings, disconnect the Ethernet cable from the
WiFi extender.
Note: To configure advanced wireless settings, see Access NETGEAR
Web genie on page 31.
To Next Page
Loading...
