Getting Started
15
Universal WiFi Extender - Powerline Edition (XAVN2001)
Method B: Use WPS for Wireless Setup
If your wireless router or gateway has a WPS (Wi-Fi Protected Setup) button, you can use
this method for wireless setup. The WPS button might be labeled WPS or it could look similar
to
or .
To use the WPS button on your wireless router or gateway to clone your existing
wireless network:
1. Pre
ss and hold the Security button on the WiFi extender for about 10 seconds, and
then release it. The Wireless LED starts blinking.
2. Press the WPS but
ton on the wireless router or gateway.
When the Wireless LED stops blinking and lights solid green, the cloning is finalized.
You now have two wireless networks with the same settings (SSID and password). When
you a
re roaming in your house, your wireless device (laptop, tablet, or smartphone)
switches from one network (router or gateway) to the other (WiFi extender), depending
on the signal quality.
To Next Page
Loading...
