6
Install the Access Point and Surf the Web with WiFi
1. Secure your Powerline network.
These instructions assume that you already have a Powerline
ne
twork that includes at least 2 Powerline devices and that you
want to add the XWN5001 to your network.
a. Make
sure that the Power LED is solid green on each
Powerline device.
b. On a Powerline device that is connected to your existing
Powerline network, press the Security button for 2 seconds,
and then release the button. The Power LED blinks green
while the device is setting up security.
To Next Page
Loading...
