ADSL2+ Modem Router User Manual
58
4.3.4 CWMP
CPE WAN Management Protocol (CWMP) is a protocol for communication between a CPE
and Auto-Configuration Server (ACS). The router offers CWMP feature. The function
supports TR-069 protocol which collects information, diagnoses the devices and configures
the devices automatically via ACS (Auto-Configuration Server).
Choose Advanced->CWMP, you can configure the TR-069 CPE. Here you may change the
setting for the ACS’s parameters.
ACS parameters:
Enable: enable or disable the CWMP
URL: ACS URL.
User Name: the username the device should use when connecting to the ACS
Password: the password the device should use when connecting to the ACS
Periodic Inform Enable: when this field is enabled, the device will send an Inform RPC to the
ACS server at the system startup, and will continue to send it periodically at an interval
To Next Page
Loading...
Need help?
General
