ADSL2+ Modem Router User Manual
59
defined in “Periodic Inform Interval” field; when this field is disabled, the device will only
send Inform RPC to the ACS server once at the system startup.
Periodic Inform Interval: the interval to send Inform RPC
Connection Request parameters:
User Name: username the remote ACS should use when connecting to the device
Password: password the remote ACS should use when connecting to the device
Path: the path of the device Connection Request URL.
Port: the port of the device Connection Request URL
4.3.5 Port Mapping
The device provides multiple interface groups, up to five interface groups are supported
including one default group. Traffic coming from one interface of a group can only be flowed
to the interfaces in the same interface group. Thus, the device can isolate traffic from group
to group for soma application. By default, all the interfaces (LAN and WAN) belong to the
default group, and the other four groups are all empty. It is possible to assign any interface
to any group but only one group.
Choose Advanced->Port Mapping page, you can configure the mapping group.
To Next Page
Loading...
Need help?
General
