Stand By Button
Press the STAND-BY button to turn on the machine, the running
indicator lights up and the default fan speed is high, and the
default humidity setting is 50%. When the machine is running,
press the power button to turn off, the running indicator light goes
off and the compressor stops immediately, and then the fan will
shut down after 30 seconds delay.
Mode button
Press the mode button to switch between Auto
mode,Continuously dehumidify mode and sleep mode.
● Auto mode: when environmental humidity ≥ set humidity +3%,
the fan starts working and compressor starts working after 3
seconds. When environmental humidity ≤ set humidity -3%, the
compressor stops working and fan stops working after 30
seconds’ delay.
Both fan speed and humidity setting can be adjusted under Auto
mode.
● Continuously dehumidify mode: In this mode,The machine
will continue to run in high fan speed , fan speed is
adjustable,humidity setting can not be adjusted.
● Sleep mode:In sleep mode , the target humidity is 60%, and
after no operation for 10 seconds,except sleeping mode indicator
light , power indicator light and child lock indicator light will dark,
other the indicator lights and display screen will be off .
When room humidity ≤ 57%RH，the compressor & fan will stop
working .
To Next Page
