When room humidity ≥ 63%RH，the fan&compressor will start
working .
In sleeping mode, when the water tank is full , the machine will
not alarm , but the water tank full indicator light will be on (red
color) to remind that the water tank is full and you need to empty
the water tank.
Timer button
Press the timing key to set timing / check timing / cancel timing
a) In the non timing state: press the timing key to enter the timing
setting state. The digital screen flashes to display the timing time.
During the flashing period of the digital screen, press the
adjustment key to adjust the timing time (0 ~ 24h).
b) In the timing state: press the timing key, and the digital screen
flashes to display the remaining timing time. Press the timing key
again during the flashing period of the digital screen to cancel the
timing.
Fan Speed button
Press this button to switch the fan speed between high and low
fan speed cycle, and the corresponding indicator light will be on .
The fan speed can be adjusted only in Auto mode
To Next Page
