3, restart the printer, enter the IP address of the modified computer inside the
browser address bar, enter the printer settings link.
4, re-enter the web will be displayed after the relevant Ethernet modify
information on the new settings page after page, then you can enter the Printer
Test option which test the printer can achieve normal correlation function, as
shown in “Image 6.6”. Its description of the relevant button:
Print: Print the contents of the text box inside
Feed: take the paper test
Cut: cutter test
BarCode: barcode printing test
OpenBox: Open the cash drawer test
Init Printer: printer initialization
Restore Factory Settings: Restore factory settings (with caution)
Image 6.6 Printer test
To Next Page
Loading...