Need help?Do you have a question about the Neumann TLM 49 and is the answer not in the manual?
Requires 48V phantom power (P48, IEC 61938) supplying at least 3.2 mA per channel.
Balanced, transformerless output via 3-pin XLR. Pin 1: OV/ground, Pin 2: Mod (+), Pin 3: Mod (-).
13 mV/Pa = -38 dBV ± 1 dB.
71 dB (CCIR) / 82 dB (A-weighted).
110 dB (0.5% THD) / 129 dB (5% THD).
48 V ± 4 V.
General| Transducer Type | Condenser |
|---|---|
| Acoustical operating principle | Pressure gradient transducer |
| Polar Pattern | Cardioid |
| Frequency Response | 20 Hz - 20 kHz |
| Sensitivity | 13 mV/Pa |
| Impedance | 50 ohms |
| Rated load impedance | 1000 ohms |
| Supply voltage | 48 V ± 4 V |
| Current consumption | 3.2 mA |
| Connecting connector | XLR 3F |
| Weight | 825 g |
| Maximum SPL | 110 dB (for THD = 0.5%) |
| Power Supply | 48 V Phantom power (P48) |
To Next Page
