Need help?Do you have a question about the Neumann U89 and is the answer not in the manual?
Details on external AC power supply units compatible with the U 89 i.
Information on using a central powering system for multiple microphones.
Instructions for powering the U 89 i using battery-operated supply units.
Swivel mount for attaching the U 89 i to a microphone stand.
Cable transformer for connecting to unbalanced inputs.
Shock mount to prevent mechanical vibration interference.
Elastic suspension to prevent mechanical vibrations from floor shock.
Windscreen for reducing noise from wind or plosives.
General| Type | Condenser |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Sensitivity | 20 mV/Pa |
| Max SPL | 134 dB |
| Power Requirements | 48 V ± 4 V phantom power |
| Rated load impedance | 1000 ohms |
| Maximum SPL for THD 0.5% | 134 dB |
| Current consumption | 0.8 mA |
| Connecting connector | XLR 3F |
| Polar Patterns | Cardioid, Figure-8 |
| Supply voltage | 48V |
To Next Page
