Need help?Do you have a question about the Neumann TLM 103 and is the answer not in the manual?
Details microphone versions and output wiring for the TLM 103.
Lists available microphone cables for the TLM 103.
Explains phantom powering (48 V, P48) for fet 100 series microphones.
Details AC supply operation with Neumann N 248 power supply units.
Describes battery power supply options using BS 48 i and BS 48 i-2 units.
Covers connecting to unbalanced or center-tap grounded inputs.
Recommends elastic suspension to prevent mechanical vibrations.
Details stand mounts and mechanical adapters like DS 120.
Describes auditorium hangers for microphone tilting and suspension.
Lists table and floor stands such as MF 3 and MF 4.
Covers foam windscreens like the WS 87 for wind noise attenuation.
Explains pop screens for suppressing pop noise and their mounting.
General| Type | Stage/performance microphone |
|---|---|
| Microphone frequency | 20 - 20000 Hz |
| Microphone direction type | Cardioid |
| Microphone input impedance | 50 Ω |
| XLR out | Yes |
| Connectivity technology | Wired |
| Connector(s) | XLR3F |
| Power consumption | 3 mA |
| Signal-to-Noise Ratio (SNR) | 87 dB |
| Product color | Nickel |
Weight and Dimensions| Microphone weight | 450 g |
|---|---|
| Microphone dimensions (D x H) | 60 x 132 mm |
To Next Page
