Need help?Do you have a question about the Neumann SM 69 fet and is the answer not in the manual?
Details on how to switch between the nine directional patterns for each capsule system using remote control switches.
Describes the different versions of the SM 69 fet and their output wiring configurations, including pin assignments.
Information on the dedicated NS 69 and NS 69i power supply units for operating the SM 69 fet microphone.
Details on powering the SM 69 fet using 48V phantom power, often via a CU 48(i) adapter.
Explanation of how to power the SM 69 fet using battery supplies, requiring specific adapters.
Details on the Z 240 high-quality sum and difference transformers for MS signal conversion.
Information on the AT 8/1 I cable transformer for connecting to unbalanced or center tap grounded inputs.
Description of the Z 26 rubber shock mount to prevent mechanical vibration interference.
Details on the EA 30 a elastic suspension for protecting the microphone from vibrations.
Information about the WS 69 open-cell polyurethane foam windscreens for noise reduction.
General| Brand | Neumann |
|---|---|
| Model | SM 69 fet |
| Category | Microphone |
| Language | English |
To Next Page
