Neutec Studio Plus Series - Page 22

Operator’s Handbook
Capitolo:
Diagnostics
22
Warning 5: Filters Cleaning
Syntom:
Filters placed on the intake vents have reached 300 hours of operation.
Solution:
Tap the screen to remove the index and replace the filters on the machine.
Warning 6: LASER temperature too cold
Syntom:
The temperature of the internal electronics is too low
Solution:
Install the equipment in a warmer place, avoid sudden changes in temperature too high. Wait until the device resets
automatically, do not turn left on to speed up the process.
If the machine doesn’t start automatically call for the service
© 2011-2020 Neutec USA
Tutti i diritti riservati
Revision:
Date
Note
00
03/06/2020
First Draft
01
02/09/2020
modified sentence on page 17-