Operator’s Handbook
Capitolo: General Information
General I nformation
T h is manual is intended for: Transporters - Installers - Users - Maintenance and Disposal personnel
Please read this manual carefully and in its entirety, as it contains important information relating to the safe and efficient operation of the device.
This manual is an integral part of the product and is included only for the device to which it relates.
This manual should be stored securely for the entire useful life of the device so that it may be referred to as needed. In the event a used device is
sold, it must be sold together with the manual and any appendices. The manufacturer assumes no liability for direct or indirect damages to
persons, property or animals caused by use of the device in conditions other than those set out in this manual. The manufacturer reserves the
right to make changes without notice to this documentary material or to the device to which it refers.
Safety pictograms:
indicates a condition or situation that may
c au se death or serious injury
.
indicates a condition or situation that may
c au se mode rate injuries
.
indicates
additional information, expl anations or hints.
Identification
Manufactured in Italy for:
Neutec/USA® Phone: 505.839.3550
7500 Bluewater Road NW Fax: 505.839.3525
Albuquerque, NM 87121
USA e-mail: neutecusa@neutec.com
Device:
MIDI00SP STUDIO PLUS 25, UNIV MINI L-WELD EQUIP.
The identification plate on the device displays its electrical characteristics and complete identification information.
To Next Page
Loading...