NEUTRIK NAC3FX User Manual

Place bushing and
chuck over the cable.
Prepare cable as
shown.
A
B
OPERATING & ASSEMBLY INSTRUCTION
NAC3FX powerCON TRUE1
|
R
Page 1
ASSEMBLY INSTRUCTION
1.
2.
[0.32"]
8 mm
[0.787”]
20 mm
[0.9”]
PE 23 mm
[0.32"]
8 mm
[0.787”]
20 mm
[0.9”]
PE 23 mm
1.
2.
OPERATING INSTRUCTION
Application:
The powerCON TRUE1 system is certified as connector with breaking capacity according IEC 60320,
VDE 0625. It is intended for use as appliance couplers and interconnection couplers. It serves to supply
power to an appliance and from an appliance to another equipment. To be installed by qualified person only.
Connector Assignment:
APPLIANCE
APPLIANCE INLET APPLIANCE OUTLET
COMBINATION
INLET OUTLET
NAC3MX
(Plug connector)
Power OUT
NAC3PX
NAC3FX
(Connector)
Power IN
NAC3MPX
Power IN
NAC3FX
(Connector)
Power OUT
NAC3FPX
NAC3MX
(Plug connector)
Approval based:
Rating:
Cable Type:
Strain Relief:
Cable O.D.:
VDE
EN 60320-1/EN60320-2-2
250 V ac / 16 A
2
H05VV-F3G 1.0 mm
2
.5 - 2.5 mm
White chuck
6.3 - 11.4 mm
, Length max. 2 m
H05VV-F3G 1
UL
UL 498 / CSA C22.2 No. 182.3
250 V ac / 20 A
SJT 3 x 12 AWG
Black chuck
9.5 - 12.0 mm

NEUTRIK NAC3FX Specifications

General

Gender	Female
Poles	3
Flammability	UL 94 V-0
Rated Current	20 A
Rated Voltage	250 V
Dielectric Strength	4 kV
Cable O.D.	12 mm
Wiring	Screw termination
Temperature Range	+80 °C