NEUTRIK NL4FX - User Manual

Assembly of the Connector:
INFO to the screw driver:
Place bushing and chuck over cable.
Prepare cable as shown.
Insert wires into terminals and secure clamp
terminals with screw driver (Pozidrive ).
For easy wiring especially on big cables, first
screw on the inner conntacts 1+ and 2+ and
afterwards the outer contacts 1- and 2- !
Push chuck up to housing .
Tighten the bushing
Pozidrive #1 Philips
Important is the stripping length of 25 mm and
12 mm.
®
Important: Align the chuck by positioning
the nose into the recess.
DO NOT USE!
12 mm [0.5"]
25 mm [1.0"]
A
B
C
D
E
A
B
C
F
F
2+
1+
1-
2-
2+
2-
1-
1+
D
E
ASSEMBLY INSTRUCTION
NL4FX / NL4FRX
speakON SPX Series Lockable Loudspeaker Connector
®
R
Page 1
IMPORTANT SAFETY INSTRUCTION
Electrical Rating acc. UL & CSA:
USR: 40A/250V, CNR: 25A/250V
“CAUTION: NOT FOR INTERRUPTING CURRENT”
ATTENTION: NE PAS UTILISER POUR COUPER LE COURANT”
“

Summary

Assembly Instruction NL4 FX; NL4 FX speakON SPX Series

Important Safety Instructions

Essential safety warnings and electrical ratings for proper connector usage.

Connector Assembly Guide

Step-by-step instructions for assembling the lockable loudspeaker connector.

Assembly of the Conversion Kit

Conversion Kit Assembly Steps

Detailed instructions for assembling the conversion kit for the connector.

Connector Handling Procedures

Guidance on how to engage and separate the connector properly.

NEUTRIK NL4FX Specifications

General

Brand	NEUTRIK
Model	NL4FX
Category	Cables and connectors
Language	English