To Next PageTo Next Page
Need help?Do you have a question about the NEUTRIK NAC3FX-W and is the answer not in the manual?
Details the product model, brand name, and manufacturer's contact information.
Specifies the declared equipment and lists relevant Union harmonisation legislation.
Lists the harmonised standards used to declare conformity for LVD and RoHS.
Lists plug termination, conductor size, cable type, length, and class.
Details the system for numbering cable variants based on Neutrik part numbering.
Describes the Schucko KERAF type 621 rubber contactstop, its colour, weight, and features.
Instructions on how to push and rotate Neutrik connectors for locking and unlocking.
Details connector assignments (inlet/outlet) and relevant VDE/UL approvals.
Guides for inserting cable into bushing/housing, separating parts, and preparing cable.
References VDE and UL standards for cable preparation during assembly.
Details on sliding cable into contacts, clamping with screws, and torque values.
Instructions for assembling chuck, housing, and using O-ring for IP protection.
Procedure for disassembling connectors and important safety/caution notes.
Cable tested per NEN3140, including visual inspection and electrical measurements.
Specifies resistance values for protective layer/conductor and max leaking current.
This document describes an International Extension Cord, specifically a power cable designed for 230VAC / 16A applications. It is identified by the model number MSPF-SH-A-7 and is manufactured by MagicShoot. The cable is constructed with a 7-meter black Titanex H07RN-F 3G1,5mm² cable and features two connectors: a Neutrik powerCON TRUE1 NAC3FX-W and a KERAF 621 Schuko plug.
The International Extension Cord serves as a power cable, facilitating the connection of electrical appliances to a power source or linking two pieces of equipment. It is designed to supply power at 230VAC and handle a current of up to 16A. The cable's construction, utilizing a robust Titanex H07RN-F cable, ensures durability and reliability for various applications. The inclusion of Neutrik powerCON TRUE1 connectors and a Schuko plug allows for secure and standardized connections in environments where these connector types are prevalent. The powerCON TRUE1 system is certified for breaking capacity according to IEC 60320 and VDE 0625, making it suitable for use as appliance couplers and interconnection couplers. This system is intended to supply power to an appliance and from one appliance to another, ensuring a safe and reliable power transfer.
The extension cord is designed for ease of use and secure connections. To connect the Neutrik connector, users should push and rotate the NAC3MX-W connector into a corresponding contra connector or chassis part until it locks securely. Disconnection is achieved by pushing the yellow button and rotating the connector until it unlocks, then pulling it out. This twist-lock mechanism ensures that the connection remains stable during operation, preventing accidental disconnections. The Schuko plug, a common standard in many European countries, provides a familiar and widely compatible interface for power outlets. The cable is intended for installation by qualified personnel only, emphasizing the importance of proper handling and setup to ensure safety and optimal performance. The design incorporates a strain relief mechanism to protect the cable from bending forces at the connection points, enhancing its longevity.
Maintenance of the extension cord primarily involves visual inspection and electrical testing to ensure continued safety and functionality. According to NEN3140 standards, the cable should undergo regular visual inspections to check for any signs of damage, wear, or degradation of the cable jacket and connectors. This includes looking for cuts, abrasions, cracks, or any deformation that could compromise the cable's integrity.
In addition to visual checks, electrical values of the cable should be measured using appropriate testing equipment, such as a Nieaf-Smitt EasyPat 250V NEN3140 apparaattester. Key electrical parameters to be tested include the resistance of the protective layer, which should be at least 1 MΩ, and the resistance of the protective conductor, which should not exceed 0.3 Ω. The maximum leakage current should also be checked and must not exceed 1mA. These electrical tests are crucial for verifying the insulation integrity and the effectiveness of the protective earthing, which are vital for user safety.
For the Neutrik connectors, the assembly instructions highlight specific steps for proper installation and disassembly, which are important for maintaining the connector's integrity and IP protection. During assembly, it is recommended to apply cable pulling lubricant to the cable jacket to facilitate insertion into the bushing and housing. The cable clamp should be tightened with a specific tool to ensure a secure grip and maintain IP protection. A yellow O-ring is used to hide and achieve IP protection, and its proper placement is essential.
In terms of repair or replacement, the safety warning explicitly states that for safety and certification reasons, the connector must be replaced if any parts are broken or show serious damage. This prevents attempts at makeshift repairs that could compromise the device's safety features. The document also mentions the use of cable end bushes and a Knipex crimping tool (97 53 04) for assembly, suggesting that specific tools and components are required for proper maintenance and repair, further emphasizing the need for qualified personnel to handle these tasks. Adherence to these maintenance guidelines ensures the continued safe and reliable operation of the International Extension Cord.
General| Type | Power Connector |
|---|---|
| Gender | Female |
| Poles | 3 |
| Rated Current | 16 A |
| Rated Voltage | 250 V |
| Rated Voltage AC | 250 V |
| Connector Series | PowerCON |
| Color | Black |
| Cable O.D. | 6 - 12 mm |
| Locking Device | Locking |
| Flammability | UL94 V-0 |
| Temperature Range | -30 °C to +80 °C |
| Contact Plating | Silver |
| Cable Entry | Straight |
| Mounting Type | Panel Mount |
| Number of Pins | 3 |
| Operating Temperature | -30 °C to +80 °C |
| Wire Size | 2.5 mm² |
| Housing Material | Polyamide |
| Shell Material | Polyamide |
| Termination | Screw-type terminals |
