NEUTRIK EtherCon Receptacle NE8FDY-C6 - User Manual

NE8FDY-C6
EtherCon Receptacle
®
-1-
B
A
E
Assembly Instructions
40 mm
Twist the
screen
8-7
4-5
6-3
2-1
8-7
4-5
6-3
2-1
S-FTP SF-UTP F-UTP
8-9 mm
C D
F
Cable tie
2. Trimming!
1. Position the
cable!
1. 2. 3. 4. 5.
Cable preparation
Shielding
Cable pairs separation Cable mount
Position wires acc. label Fix wires

Summary

Cable preparation

Step 1

Initial cable preparation.

Step 2

Prepare wires by twisting strands.

Step 3

Twist the screen.

Step 4

Separate and arrange wires.

Step 5

Connect wires according to color code.

Shielding types

S-FTP

Shielded/Foiled Twisted Pair shielding type.

SF-UTP

Shielded/Foiled Unshielded Twisted Pair shielding type.

F-UTP

Foiled Unshielded Twisted Pair shielding type.

Cable pairs arrangement

Wire pair 8-7

Specific wire pair arrangement for connection.

Wire pair 6-3

Specific wire pair arrangement for connection.

Wire pair 4-5

Specific wire pair arrangement for connection.

Wire pair 2-1

Specific wire pair arrangement for connection.

Cable mount

Cable tie

Securing the cable with a tie.

Position wires

Position cable

Instruction to position the cable correctly.

Trimming

Trimming wires for proper fit.

Fix wires

Cover assembly

Break out

Instruction to break out a component.

Connect the screen

Hang up

Instruction to hang up the screen.

Cut

Instruction to cut a component.

Assembly the adapter

Insert until it snaps in

Insert adapter until it securely snaps.

Grounding option

Insert contact

Insert contact only if screen connects to front panel.

Assembly the chassis

Press down

Instruction to press down a component.

Snap in

Instruction to snap a component into place.

Finish

NEUTRIK EtherCon Receptacle NE8FDY-C6 Specifications