NEUTRIK powerCON TRUE1 TOP - User Manual

R
Page 1BDA 541 V5
powerCON TRUE1 TOP NAC3FX-W-TOP
® ®
|
PRODUCT MANUAL
1 APPLICATION & SAFETY INSTRUCTION
·
The powerCON TRUE1 system is certified as appliance couplers with breaking capacity according to
® ®
IEC 60320-1, EN IEC 60320-1, UL 60320-1, CSA C22.2 No. 60320-1.
·
It serves to supply power to an appliance and from an appliance to other equipment.
·
To be installed by qualified person only.
·
Appliance couplers acc. to IEC 60320-1 are suitable to be used in cord sets and interconnection cord
sets acc. to IEC 60799
APPLICATION:
CONNECTOR
NAC3FX-W-TOP
PLUG CONNECTOR
NAC3MX-W-TOP
APPLIANCE INLET / APPLIANCE OUTLET
NAC3PX-TOP
APPLIANCE OUTLET
NAC3FPX-TOP
NAC3FPX-WOT-TOP
NAC3FPX-ST-TOP
APPLIANCE INLET
NAC3MPX-TOP
NAC3MPX-WOT-TOP
Products are in
compliance with:
IEC 60320-1
EN IEC 60320-1
UL 60320-1
CSA C22.2 No. 60320-1
Ratings:
Conductor cross section:
16A 250V AC
2
1.5 - 2.5 mm
20A 250V AC
16 - 12 AWG
CONNECTOR
NAC3FX-W-TOP
PLUG CONNECTOR
NAC3MX-W-TOP
POWER OUT POWER IN / POWER OUT
u Combination
POWER IN
P
IP 65 RATED
CABLE LIST
Approved cables:
H07RN-F
H05VV-F
2 2
3 x 1.5 mm 3 x 2.5 mm
ü -
ü ü
Approved cables:
SOOW
SJOOW
16/3 AWG 14/3 AWG 12/3 AWG
-S -L -L
-S -S -L
CABLE LIST
ð

Summary

Application and Safety Instructions

IP 65 Rated Protection

Specifies the product's protection against dust and water ingress for outdoor use.

Product Compliance and Specifications

Lists product certifications, AC ratings, and conductor cross-section compatibility.

Approved Cable Types

Details approved cable types for specific cross-sections and AWG sizes.

Assembly Information

Cable Preparation and Bushing Placement

Guides on placing cable, bushing, chuck, and preparing cable ends.

Contact Wiring and Clamping

Details on inserting cable into contacts and securing with screws, including wiring color codes.

Chuck and Housing Assembly

Instructions for sliding the chuck onto the insert and into the housing.

Cable Clamp Tightening

Procedure for sliding and tightening the cable clamp bushing using a specific tool.

Disassembly and Safety

Disassembly Procedure

Step-by-step guide on how to unlock and unscrew the connector's twist lock mechanism.

Safety Precautions

Warnings regarding bending forces on connections and replacement of damaged parts.

Application and Safety Guidelines

Assembly and Component Handling

Ensuring proper personal protective equipment and using designated components.

Intended Product Application

Specifies the product's exclusive use for electronic equipment, not medical or explosive environments.

Operation and Cleaning

Guidelines for checking contact areas, handling elevated temperatures, and cleaning procedures.

Damage Handling

Instructions on careful handling and checking suitability after visible damage.

NEUTRIK powerCON TRUE1 TOP Specifications

General

Brand	NEUTRIK
Model	powerCON TRUE1 TOP
Category	Cables and connectors
Language	English