4081 User Manual Issue 3
Rear Connectors / Pin-out information
Mic / Line Input XLRs
1 Screen
2 Hi
3 Lo
Mic / Line Output XLRs
These can either be used as Direct Outputs from the unit, or as Insert
Sends.
The Output is Post- the Gain control.
Pin-outs as above.
Power input
48 volts, 8-pin connector.
This connector is polarised so can only be connected one way.
INS IN / LINE OUT
A 25-pin D-sub connector that contains the Insert Return signals and the
Line outputs.
The Line Out part of this connector will have no function unless the
optional AD/DA card is fitted (see below).
- 25 -
To Next Page
Loading...
