SECTION 1 – GENERAL INFORMATION AND SAFETY
1–47
TOWING THE COMBINE
Towing the combine is not recommended, but if it
must be towed, the following steps must be taken:
1. Move the multi-function handle into neutral and
switch off the rear-wheel drive.
2. Select neutral gear. If not possible with the
remote gearshifting, refer to
Section 5 – ”FAULT FINDING”.
3. Release the handbrake. If not possible with the
remote parking brake switch, refer to
Section 5 – ”FAULT FINDING”.
4. Tow at a maximum speed of 16 km/h (10 MPH).
5. Provide adequate warning signals to make other
road users aware that the combine is being
towed.
56
NOTE:
1. Towing the combine with selected gear will
immediately lead to irreparable hydrostatic
damage.
2. Should the combine become stuck in the mud,
always tow the combine with a cable or chain
attached to the traction axle or at the rear to the
lower frame hooks (1). Never tow the combine
with a cable attached to the steering axle.
57
To Next Page
Loading...
Need help?
General
