New Image FITT ROW - Quick Start and Assembly: Step 1; Attaching the Front Stabiliser Tube

Congratulations on purchasing
your new FITT Row!
QUICK-START GUIDE:
1. Remove the square neck bolts (9), arc washers (10), spring washers (11) and M8 Nut (12)
from the front stabiliser tube (6) using wrench (B).
2. Fix front stabiliser tube (6) to main frame (27) with square neck bolts (9), arc washers
(10), spring washer (11), and M8 Nut (12) using multi wrench (B).
Step 1
9
11
10
12
27
6
(9) M8 Square neck bolt 2pcs
(10) M8 Arc washer 2pcs
(11) M8 Spring washer 2pcs
(#B) Multi Wrench 1pc
(12)M8 Nut 2pcs