43
ELECTRICAL SECTION
10
10
IMPORTANT: The cooker must be installed in accordance with the
manufacturer’s instructions.
Incorrect installation, for which the manufacturer accepts no responsi bility,
may cause injury to persons or animals etc.
Before making any repairs - disconnect the appliance from the electrical
supply.
The connection of the appliance to earth is mandatory.
The manufacturer declines all responsibility for any inconvenience resulting
from not observing this condition.
The appliance must be connected to the electrical network verifying above all that the
voltage corresponds to the value indicated on the specifications plate and that the
cables section of the electrical plant can bear the load which is also indicated on the
plate.
It is recomended that the appliance is connected directly to the mains by fixed wiring,
placing a double pole switch with minimum opening between the contacts of 3 mm.
Alternative connection methods may be available as long as they conform to current IEE
wiring regulation.
The power supply cable must not touch the hot parts and must be positioned so that it
does not exceed 75°C at any point.
Once the cooker has been installed, the switch must always be accessible.
To Next Page
Loading...
