Newco GXF-8D User Manual

2Man Pt No 701528
REV 10-01
N E W C O E N T E R P R I S E S
INSTALLATION and OPERATION MANUAL for GX SERIES BREWERS
GXF3-15 GXF-8D
BREWER SPECIFICATIONS
Model
No of
Warmers Width Length Height*
US
120V
Amps
US
120/240V
Amps
Canada
120V
Amps
Canada
120/240V
Amps
GXF1-15 1 9-1/2" 19" 20-3/4 12.7 24.1 10.8 20.3
GXF1-30 1 9-1/2" 19" 26-3/8 12.7 24.1 10.8 20.3
GXF2-15 2 9-1/2" 19" 22-3/8 13.5 24.9 11.6 21.1
GXF2-30 2 9-1/2" 19" 28 13.5 24.9 11.6 21.1
GXF3-15 3 9-1/2" 19" 22-3/8 14.4 25.8 12.5 22
GXF3-30 3 9-1/2" 19" 28 14.4 25.8 12.5 22
GXF-P N/A 9-1/2" 19" 25-1/8 11.7 23.3 9.8 19.5
GXF-T N/A 9-1/2" 19" 32-9/16 11.7 23.3 9.8 19.5
GXF-TD N/A 9-1/2" 19" 27-11/16 11.7 23.3 9.8 19.5
GXF-8D N/A 9-1/2" 19" 30-3/16 11.7 23.3 9.8 19.5
Shipping weight is approximately 50 pounds for all above units
* Height does not include the 4” adjustable legs. Add approximately 4” to the height shown when using these legs.
NOTE: Automatic models without faucet and non plumbed in units are also available.

Newco GXF-8D Specifications

General

Brand	Newco
Model	GXF-8D
Category	Coffee Maker
Language	English

Summary

Plumber's Installation Instructions

Plumbing Installation Steps

Detailed instructions for connecting the water line, pressure, and strainer.

Electrical Hookup

Voltage Convertibility

Information on the brewer's ability to operate on 120V or 240V circuits.

Power Cord Connection

Step-by-step guide for attaching the power cord or conduit to the brewer.

Electrical Connections and Rating Decals

Instructions for making electrical connections and applying rating decals.

Installation Instructions

Initial Water Fill and Check

Procedure for filling the brewer tank with water and checking operation.

Automatic Model Volume Adjustment

How to adjust brew volume on automatic models using the timer dial.

Manual By-Pass System Calibration

Steps to adjust and measure the by-pass flow for brew steeping time.

Thermostat and Heating Procedure

Adjusting the thermostat and initial heating process for brewing.

Post-Heating Checks and Operation

Steps to check water temperature and perform initial cycles.

Coffee Preparation Procedures

Step-by-Step Brewing Process

Detailed instructions for brewing coffee, from filter to decanter.

Liming

Preventing and Clearing Liming Issues

Procedure for cleaning the sprayhead and tank to prevent mineral buildup.

Warranty

Component Location

Electrical Component Identification

Diagram illustrating the location of key electrical components and terminal blocks.

Replacement Parts List

Wiring Diagram