Newco CX-TOUCH User Manual (English)

Other manuals for Newco CX-TOUCH

Operation Manual29 pages

Programming Instructions2 pages

Questions and Answers:

R
Ryan BrownJul 26, 2025
What to do if Newco CX-TOUCH shows Fill Timeout Error?
- M
  Michael HopkinsJul 26, 2025
  If the Newco Coffee Maker displays a Fill Timeout Error, it could be due to several reasons: * The water supply to the machine might be shut off. In this case, check the water supply shutoff. * The supply line may be blocked or too small. If so, repair or replace it as needed. * A restricted water filter could also be the cause, requiring replacement. Service might be required. * It's also possible that the inlet solenoid valve is faulty, necessitating a replacement. Service might be required. * In rare cases, a control board failure could be the reason, which would also require replacement. Service might be required.
T
travisandradeAug 4, 2025
Why does my Newco Coffee Maker show a Heater Error?
- S
  Shannon MorenoAug 4, 2025
  If your Newco Coffee Maker displays a Heater Error, it could be due to a faulty thermistor, requiring replacement. Alternatively, the heater element might be faulty, or the control board might have failed, both of which require service for replacement.
M
mrobertsonAug 15, 2025
What to do if Newco Coffee Maker shows Thermistor Error?
- G
  griffithbillAug 15, 2025
  If your Newco Coffee Maker shows a Thermistor Error, there are a few potential causes: 1. The thermistor might not be properly plugged in. Ensure that the plug in housing is securely latched. 2. The thermistor itself could be faulty, requiring replacement. 3. A control board failure could also be the cause, which would require service for replacement.

Newco CX-TOUCH Specifications

General

Power	Unknown
Touchscreen	Yes
Programmable	Yes
Voltage	120V
Capacity	12 cups
Features	Programmable timer, Automatic shut-off, Touchscreen control, Water level indicator, Keep warm function

Summary

Warranty Information

Warning Labels Overview

Machine Dimensions and Specifications

Pass Through Dimensions

Machine Setup and Installation

Plumbing Connections

Details on connecting the brewer to a water system, including pressure and tubing requirements.

Electrical Hook-Up

Guidelines for connecting the brewer to the electrical circuit, including data plate and local codes.

Installation Instructions

Guidance on placing the machine, filling the tank, heating, and altitude adjustments for brew temperature.

Machine Startup Instructions

Steps for filling hoppers, connecting water, powering on, and initial machine filling and heating process.

Machine Programming and Settings

Programming Menus

Overview of the programming interface, including access to maintenance, statistics, and setup.

Maintenance and Statistics Tracking

Details on resetting water filter, replacing whipper seal, and tracking machine usage statistics.

Setup and Configuration Options

Configuration options for water temperature, waste bin size, air blow, water filter, touchless modes, and energy save.

Advanced Settings

Options for restoring factory defaults and customizing drink selection menus and sizes.

Calibration Procedures

Auger Calibration

Procedure for calibrating powder dispensing augers for accurate product measurement.

Flow Meter Adjustment

Instructions for adjusting flow meter settings to fine-tune dispensed liquid volume.

Flow Meter Test

Diagnostic tool to test the flow meter's rotation count for precise volume measurement.

Mixing Bowl Calibration

Procedure for calibrating the mixing bowl to ensure accurate water dispensing for drinks.

Recipe Entry and Management

Pre-Infusion and Pod Settings

Parameters for pre-infusion time, pod volume, and pod run time to customize brew strength.

Water and Ratio Settings

Adjustments for water volume and milk/chocolate ratio to control powder incorporation in drinks.

Local Setup and Customization

Screen and Language Options

Settings for brewing screen display (logo vs. slate) and language selection (English/French).

Wi-Fi Setup and Custom Logo

Detailed steps for connecting to Wi-Fi, uploading custom logos, and managing network settings.

Machine Operation and Brewing

Brewing Drinks

Instructions for brewing drinks using the touch screen, including pod placement and selection process.

Drinks Submenu Examples

Visual examples of drink selection submenus for coffee, specialty drinks, and tea options.

QR Code Brewing Instructions

Guide to using QR codes for touchless brewing, including phone setup and machine interaction.

Servicing and Troubleshooting

Service Notes and Troubleshooting

Common error messages, their causes, and recommended troubleshooting steps or service calls.

QR Code Error Messages

Explanation of 'Oops!' error messages related to QR code scanning and their resolutions.

Other Service Screens

Displays for refilling product hoppers, rinsing the brew mechanism, and managing the waste bin.

Draining the Hot Water Tank

Draining Methods

Two detailed methods for safely draining the hot water tank, including tube and plug removal and replacement.

Inside Your Machine

Machine Access Points

Identification of screw locations for accessing internal components of the machine for servicing.

Pod Brew Mechanism Removal

Step-by-step guide to removing the pod brew mechanism, including fitting and harness disconnection.

Component Assembly and Parts Diagrams

Universal 2 Pod Brew Mech Assembly

Detailed parts breakdown for the universal 2 pod brew mechanism assembly.

Whipper Assembly

Component parts list and diagram for the whipper assembly.

Whipper & Hopper Assembly

Parts identification for the whipper and hopper assembly, including elbow and bulkhead connections.

Machine Components and Assemblies

Tank Assembly

Diagram and parts list for the round and square tank assemblies.

Front Panel Assembly

Parts breakdown for the main front panel, door, and associated brackets and hinges.

Door Assembly

Components of the door assembly, including the tablet, retainers, hinges, and inner panel.

Wiring Diagram

Related product manuals

Newco Cafe Espresso 2.0