MANUAL PN 782389 REV 20230126MMF
Technical Service: 1-800-556-3926
19
WI-FI SETUP AND CUSTOM LOGO
Note: Installation of a custom logo completely replaces the Newco logo.
If slates are chosen in Brewing Screen option on the Local Setup page, the custom logo will
still appear during any non coffee cycle.
Enter into the main Programming menu by tapping the Tea & Water header three times.
Select the Local Setup button, then the Network Setup button.
After selecting Network Setup, your screen will change to tablet settings. Please turn Wi-Fi on
and connect to your network.
After connecting to your Wi-Fi network, you will need to restart the brewer. Continue to the
Local Setup Screen once more.
The IP Address is unique
for every machine.
You will need this screen
in order to install a
Custom Logo.
On your smartphone,
install a FTP app.
All information must be
typed exactly as it is seen
on this screen when
inputting into a FTP app.
To Next Page
Loading...
