Need help?Do you have a question about the Newland FM420 and is the answer not in the manual?
General| Scanner type | 2D |
|---|---|
| Yaw reading angle | -60 - 60 ° |
| Decoding standards | 1D: Code128 EAN-13 EAN-8 Code39 UPC-A UPC-E Codabar China post 25 Interleaved 2/5 ISBN/ISSN Code 93 GS1 Databar etc. 2D: PDF417 QR Code DataMatrix(ECC200, ECC000, 050, 080, 100, 140) Aztec Chinese-sensible code etc. |
| Tilt reading angle | -180 - 180 ° |
| Optical sensor resolution | 752 pixels |
| Dimensions (WxDxH) | 50 x 60 x 26 mm |
| Standard interfaces | USB |
| Input voltage | 5 V |
| Certification | FCC Part15 Class B, CE EMC Class B IP54 |
| Product color | Black |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | -5 - 45 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Weight | 70 g |
|---|
Details the pinout and function of the scanner's data interface connector.
Provides technical specifications for image capture, scanning, and electrical/environmental parameters.
Illustrates the scanning distance ranges for various barcode symbologies.
Instructions for connecting the FM420 scanner to a host computer via USB or RS232.
Details on how to restore the scanner to its default factory configuration.
Configuration options for RS232 communication baud rates.
Options for USB connection modes: HID-KBW, DataPipe, COM Port Emulation, HID-POS.
Procedure to set the keyboard country code for HID-KBW mode.
Settings for keystroke delay between emulated keystrokes in HID-KBW mode.
How to program stop suffixes for line feed and carriage return functionality.
Instructions on reading digit codes and saving scanner configurations.
Lists common problems, their possible causes, and solutions for the scanner.
To Next Page
