Need help?Do you have a question about the Newland NLS-HR20-RF and is the answer not in the manual?
Step-by-step instructions on how to successfully scan barcodes with the device.
Resets all scanner settings to their original factory configurations using a barcode.
Switches between manual scanning triggered by the trigger and continuous scanning modes.
Establishes a wireless connection between the NLS-HR20-RF scanner and its USB dongle.
Chooses the communication interface: HID Keyboard or COM Port Emulation.
Configuration options for Code 128 symbology, including length ranges.
Configuration options for UCC/EAN-128 (GS1-128) symbology, including length ranges.
Settings for enabling/disabling EAN-8, check characters, and add-on codes.
Settings for enabling/disabling EAN-13, check characters, and add-on codes.
Settings for UPC-E barcode, including check characters and add-on codes.
Settings for UPC-A barcode, including check characters and add-on codes.
Settings for Interleaved 2 of 5 symbology, including check character and length ranges.
Settings for Matrix 2 of 5 symbology, including check character and length ranges.
Settings for Industrial 25 symbology, including check character and length ranges.
Settings for Standard 25 symbology, including check character and length ranges.
Configuration options for Code 39 symbology, including check character and length ranges.
Configuration options for Codabar symbology, including check character and length ranges.
Configuration options for Code 93 symbology, including check character and length ranges.
Configuration options for Code 11 symbology, including check character and length ranges.
Settings for Plessey symbology, including check character and length ranges.
Settings for MSI-Plessey symbology, including check character and length ranges.
General| Radio Frequency | 2.4 GHz |
|---|---|
| Humidity | 5% to 95% (non-condensing) |
| Drop Resistance | 1.5m |
| Connectivity | Radio Frequency (RF) |
| Communication Distance | 100m |
| Battery | Li-ion |
| Power Supply | 5V DC |
| Operating Temperature | 0°C to 45°C |
| ESD Protection | ±15 KV (air discharge) |
| Decode Capability | 1D Barcodes |
To Next Page