Need help?Do you have a question about the Newland NLS-HR3250-SX and is the answer not in the manual?
Instructions for connecting the scanner to a PC or other terminal.
Step-by-step guide on how to use the scanner to read barcodes.
Method for configuring the scanner by scanning programming barcodes.
Details on configuring communication parameters for RS-232 connection.
Setting the data transmission speed to match host requirements.
Configuring parity settings for serial data transmission.
Procedure to program data extraction rules for 1D barcodes.
Explains the syntax and structure for creating batch commands.
General| Image Sensor | CMOS |
|---|---|
| Light Source | LED |
| Operating Voltage | 5 VDC ± 5% |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Humidity | 5% to 95% (non-condensing) |
| Type | Handheld |
| Decode Capability | 1D, 2D |
| Interfaces Supported | USB, RS232 |
| Storage Temperature | -40°C to 70°C |
| Drop | 1.5m |
| ESD Protection | ±8kV (air discharge), ±4kV (contact discharge) |
To Next Page