Need help?Do you have a question about the Newland NLS-HR1550-3E and is the answer not in the manual?
Provides an overview of the manual and its purpose.
Outlines the content of each chapter in the manual.
Lists available manuals for the HR15 cordless scanner.
Introduces the scanner's capabilities, performance, and design.
Details the process of unboxing the scanner and its accessories.
Describes the scanner's components and LED indicators.
Describes the CD15 cradle's components and LEDs.
Explains the different modes for data transfer.
Details the pin configuration of the CD15 cradle's data port.
Explains connection options via USB or RS-232 ports.
Guides on connecting the cradle using USB or RS-232 cables.
Covers powering the device, entering sleep, and rebooting.
Provides instructions for cleaning and caring for the scanner.
Illustrates the scanner's read range for different barcode types.
Provides step-by-step guidance for scanning barcodes.
Details acceptable pitch, roll, and skew angles for scanning.
Lists technical performance metrics like light source, sensor, and scan rate.
Provides physical characteristics including dimensions and weight.
Details operating and storage conditions like temperature and humidity.
Lists wireless technology, distance, and data rate.
Shows physical measurements of the scanner via diagrams.
Shows physical measurements of the CD15 cradle.
Introduces barcode and command programming methods.
Explains how to use programming barcodes for configuration.
Details command string format and communication protocols.
Explains how to restore factory defaults.
Details how to pair scanners with cradles or routers.
Lists available scanner operating modes like Power Off and Test Mode.
Allows setting the auto power-off duration.
Covers manual, auto, blink, and sense modes.
Configures timeouts for scan sessions and rereading barcodes.
Adjusts scanner response to ambient light changes.
Configures scanner behavior in low ambient light.
Sets the number of decode attempts for higher accuracy.
Configures beep sound for successful scans.
Sets barcode reading area and data output timing.
Enables/disables temporary mute for decode beeps.
Scans barcodes to retrieve scanner details.
Scans barcodes to retrieve cradle details.
Scans barcodes for wireless module status.
Explains synchronous, asynchronous, and batch modes.
Configures baud rate, parity, stop bits, etc.
Details USB HID-KBW and COM Port Emulation.
Configures keyboard layout and inter-character delay.
Allows converting scanned data case.
Enables/disables support for enhanced communication.
Defines the order of data elements like Code ID and AIM ID.
Allows adding a user-defined prefix to scanned data.
Configures symbology identifiers as prefixes.
Configures user-defined barcode type identifiers.
Allows adding a user-defined suffix to scanned data.
Configures carriage return or line feed characters.
Covers enabling/disabling, setting Code ID, and length ranges.
Covers enabling/disabling, setting Code ID, and length ranges.
Covers enabling/disabling, setting Code ID, and length ranges.
Covers enabling/disabling, Code ID, add-on codes, extension, and check digit.
Covers enabling/disabling, check digit, Code ID, and add-on codes.
Covers enabling/disabling and setting Code ID.
Covers enabling/disabling, format, and Code ID.
Covers enabling/disabling, check digit, Code ID, add-on codes, system character, and extension.
Covers enabling/disabling, check digit, preamble character, Code ID, and add-on codes.
Covers enabling/disabling, Code ID, parity check, and length range.
Covers enabling/disabling, check digit, and Code ID.
Covers enabling/disabling, check digit, and Code ID.
Covers enabling/disabling and check digit.
Covers enabling/disabling and check digit.
Covers enabling/disabling, parity check, check digit, and length range.
Covers enabling/disabling, parity check, check digit, and length range.
Covers enabling/disabling, parity check, check digit, and length range.
Covers enabling/disabling, parity check, check digit, and length range.
Covers enabling/disabling, parity check, check digit, start/stop, ASCII, and length range.
Covers enabling/disabling, parity check, check digit, start/stop, and length range.
Covers enabling/disabling, parity check, check digit, and length range.
Covers enabling/disabling, check digit, and parity check.
Covers enabling/disabling, parity check, check digit, and length range.
Covers enabling/disabling, parity check, check digit, and length range.
Covers enabling/disabling and Code ID.
Covers enabling/disabling, Code ID, length range, and sample barcodes.
Covers enabling/disabling, Code ID, and length range.
Lists default settings for various scanner parameters.
Provides AIM IDs for different barcode types.
Lists Code IDs for various barcode types.
Displays barcodes for numeric input (0-9).
Lists barcodes for saving, cancelling, or deleting settings.
General| Type | Handheld bar code reader |
|---|---|
| Wavelength | 620 nm |
| Sensor type | CCD |
| Scanner type | 1D/2D |
| Read rate (max) | 300 reads/s |
| Linear (1D) barcodes supported | Codabar, Code 128, Code 39, Code 93, EAN-13, EAN-8, GS1-128 (UCC/EAN-128), U.P.C. |
| 2D (matrix & stacked) barcodes supported | MicroPDF417, PDF417 |
| USB version | 1.1 |
| Standard interfaces | USB, RS-232 |
| Connectivity technology | Wired & Wireless |
| Certification | FCC Part15 Class B, CE EMC Class B, CCC |
| Product color | Black |
| LED indicators | Yes |
| Housing material | - |
| International Protection (IP) code | IP54 |
| Battery life | 17 h |
| Charging time | 3.5 h |
| Input voltage | 100 - 240 V |
| Input frequency | 50/60 Hz |
| Battery capacity | 2200 mAh |
| Power source type | DC |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 113.5 mm |
|---|---|
| Width | 73 mm |
| Height | 159 mm |
| Weight | 210 g |
| Base weight | 150 g |
| Base dimensions | 82.5 x 195 x 47 mm |
To Next Page