Need help?Do you have a question about the Newland NLS-HR52 and is the answer not in the manual?
Provides detailed instructions for setting up and using the NLS-HR52 scanner and cradle.
Briefly describes the content and purpose of each chapter in the user guide.
Details the components, LEDs, and dimensions of the HR52 scanner and CD52 cradle.
Instructions for mounting the cradle and connecting it to a host via USB or RS-232.
Guides on pairing the scanner to the cradle, wireless communication, and basic operation.
Explains Barcode, Command, and EasySet programming for scanner configuration.
Covers scan modes, timeouts, sensitivity, and decode area for optimizing performance.
Barcodes to retrieve scanner details like firmware, serial number, and battery status.
Describes Bluetooth HID and Cradle Mode for scanner-to-host communication.
Manages data storage and transmission when out of service range.
Configures automatic data retransmission and transmission timeout parameters.
Manages global enablement for all, 1D, 2D, and Postal symbologies.
Settings for Code 128, EAN-8, EAN-13, UPC-A, and UPC-E symbologies.
Settings for PDF417, QR Code, Aztec, and Data Matrix symbologies.
Enables or disables all prefixes and suffixes for barcode data transmission.
Allows defining and applying user-defined prefixes and suffixes to barcode data.
Configures data packing formats and terminating characters for data transmission.
Lists Digit, Save/Cancel, and other essential barcodes for configuration.
Provides factory default settings and AIM/Code ID tables for symbologies.
ASCII table and Unicode key maps for command interpretation and character input.
General| Type | Handheld |
|---|---|
| Light Source | LED |
| Aiming | Laser |
| Minimum Resolution | 3 mil |
| Humidity | 5% to 95% (non-condensing) |
| Sealing | IP54 |
| Weight | 180 g |
| Image Sensor | CMOS |
| Scan Modes | Manual, Continuous |
| Interfaces Supported | USB |
| Operating Temperature | -20°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Drop Resistance | 1.5m |
| ESD Protection | ±8 kV (direct discharge); ±15 kV (air discharge) |
| Symbologies | 1D, 2D |
| Power Supply | 5V DC |
| Scan Rate | 300 scans per second |
To Next Page