Why does the limit switch shut down my Newmac CL 115-170C?
If the limit switch shuts down your Newmac Furnace, it's often due to insufficient return air supply or an obstruction, such as a rug covering a supply air grill. Ensure adequate airflow to prevent this issue.
What to do if the draft fan does not operate on my Newmac CL 115-170C Furnace?
If the draft fan on your Newmac Furnace isn't working when the solid fuel thermostat is turned up, check the following: 1. Power supply. 2. Voltage on the secondary side of the control relay transformer. 3. Wiring connections. 4. Voltage at the fan motor. If all these check out, the fan itself may be defective.
Step-by-step guide for operating the oil burner component.
Instructions for operating the solid fuel burning aspects of the furnace.
Instructions for operating the unit safely during power outages.
Critical practices to ensure safe operation and prevent unit damage.
Strategies to prevent chimney fires and methods for suppression.
Guidelines for cleaning and maintaining the unit at the end of the heating season.
Instructions for optimal operation of the multifuel and solid fuel units.
Essential safety advice and installation considerations for homeowners.
Information on Newmac's warranty coverage for heating units and components.
Key terms, conditions, and limitations governing the Newmac warranty.
To Next Page
General
